Cliff McCrawl Industries, LLC
H10 Optic Aluminum Front Inner Fenders (Pair)
H10 Optic Aluminum Front Inner Fenders (Pair)
1.0mm 5052 Aluminum
Sold in pairs
H10 OPTIC FRONT INNER FENDER INSTALLATION INSTRUCTIONS:
1. Remove front wheels, remove hood and side panels. Disconnect front shocks from upper shock mount
2. Remove the (6) M3 screws holding the front of the cage to the bulkhead (The bump stops do not need to be removed)
3. Slide fender panel in between the cage side and bulkhead so the mounting tab hole aligns with the underside of the hood mount hole and the crescent shaped lobes align with the screw bosses on the front of the cage
4. Install the included M3x6mm screw in the mount tab and into the underside of the hood mount hole. DO NOT tighten all the way yet. (A short screw is required to avoid interference with the hood mount screw)
5. Be sure the panel is flush with the cage side and it is all the way forward before reinstalling the cage side screws (Minor adjustment of the panel will be necessary to achieve an optimal fit)
6. Snug up the M3x6 mount tab screw
7. Repeat on the other side
8. Reinstall shocks, panels and wheels
9. Enjoy!